Privacy Policy Update
Click here to learn about the new Privacy Policy updates from Practical Components.
The RocHard 1 MilProbe is a 0.3" long Micro-tip in a 4 3/8" long hex shape stainless steel handle. The Micro-tip is tapered to a one mil diameter tip for TAB, BGA, and other ultra fine pitch rework. The tip is either straight (SH-341) or 50º angled at 5 mil from the point (SH-316). The different tip geometry allows the tips to reach between all circuit leads and traces under a microscope.
* The probe tip is strong and long lasting since it is made of special, proprietary alloy to achieve maximum strength.
* The hex shape stainless steel handle provides a easy grasp of the tool when operating under a microscope. It also prevents the tool from rolling on the work bench.
* To further increase the comfort of using the tool, a foam sleeve that goes onto the handle is available as an optional part.
* The 1 MilProbe comes with a protection cap and a vinyl pouch. The cap keeps the tip from damage and keeps the operator from injury. The pouch provides additional protection to the tip and provides a convenient way of storing and carrying the 1 MilProbe.
MilProbe Selection Guide
A = 1 MilProbes, B = 10 MilProbes, C = 25 MilProbes
Application |
Pitch Size |
|||||
2-10 mil |
10-15 mil |
15-25 mil |
25-30 mil |
30+ mil |
Through-Hole |
|
Testing Solder Joint & Wire Bonding Strength |
A |
A, B |
B |
B, C |
C |
C |
Straightening Leads & Wires |
A |
A, B |
B |
B, C |
C |
C |
Cleaning Leads & Traces |
A |
A |
B |
B |
C |
C |
Applying Epoxy |
A |
A |
B |
B |
C |
C |
The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room.